Invisible -0.5-1 Second Fast Drying -EXTRA STRONG- LONG RETENTION up to 8 weeks Eyelash Extension Glue/Adhesive CLEAR COLOR
Opened or used glue is not qualify for return or refund .
Tips:
Our glue is a fast-drying formula that is extremely sensitive to moisture in the air. Even small amounts of humidity can trigger the curing process. That’s why each glue pouch includes a small packet of desiccant to absorb moisture. Please make sure the bottle does not come into contact with water and avoid wiping the nozzle with anything damp.
We offer two main types of glue: one for standard humidity and one for low humidity.
In extremely dry environments, the glue may cure very slowly or seem inactive, as moisture in the air is necessary to trigger the curing process. The low-humidity formula is specially designed to be more sensitive to environmental moisture—meaning even a small amount of humidity is enough to activate the curing reaction. In normal humidity conditions, it cures even faster than the standard humidity formula.
When you receive the glue, you can gently shake the bottle.
- If you hear a clear, watery sound, the glue is in good condition.
- If the sound is faint or sluggish, the glue may have aged. In that case, please do not open the bottle—just send us a video of the shaking test, and we’ll be happy to send a replacement.
Please note: once opened, glue is non-returnable.
If the glue worked well the first time you used it, that confirms the product was in perfect condition. If it later dried out, it’s likely due to storage or handling issues, which are not covered under our return policy.
If the glue seems dry on the second use, it may just be a clogged nozzle. You can shake the bottle to check—if you still hear liquid inside, the glue is fine. Try using a longer pin to gently widen the nozzle opening and allow the glue to flow again.
⚠️ Important reminders:
- ❌ Do not wipe the nozzle with water
- ❌ Do not transfer the glue to another bottle —it will fully cure within hours
- ✅ Always store the glue in the original pouch with the desiccant and seal tightly, or in an airtight container with the desiccant inside
Tips to prevent nozzle clogging:
- When dispensing, hold the bottle nozzle down and quickly squeeze out one drop
- Immediately turn the bottle nozzle upright before releasing pressure
- This helps draw excess glue back into the bottle instead of letting it sit in the nozzle
- Wipe the nozzle clean with a dry tissue, close the cap tightly, and store it in the original pouch with the desiccant, or in an airtight container with the desiccant inside
- If the nozzle isn’t cleaned properly, dried glue can reduce the seal and cause air to enter
If you have any further questions or need assistance, please don’t hesitate to reach out. We’re always happy to help!